April 1, 2023
Metal Detecting

Metal detecting can be a very rewarding hobby, but it does require patience and time to find the best spots. If you’re tired of messing up every time you go out to find some metal, then this blog post is perfect for you! We will walk through 7 helpful tips and tricks that will improve your metal detecting finds.

Follow these steps and you might come across something priceless!

7 Tips to improve your metal detecting finds:

Don’t Ignore Weak Signals:

While you’re out metal detecting, don’t ignore those little signals. You never know what’s hiding in the dirt! Even if you think it’s just a bottle cap, dig it up and find out. You might come across something good! Sometimes, big gems are lying deep underground which makes the signals a little iffy. It can easily throw you off and you might miss a finding of a lifetime. Investing in quality equipment from a reputable metal detector store like Teknetics Direct can prove to be valuable here. While you’re at the store, grab two detectors if you can.

Let us explain why.

Taking an extra detector with you:

Let’s say you have a metal detector and while you’re out exploring, the battery dies. If you only have one metal detector with you, it will get exceedingly frustrating.  But having an extra machine is always beneficial as it will save some time from going back home to get batteries or another machine so you can continue looking for hidden treasures! Carrying extra batteries comes next.

Always carry extra batteries:

We all know that batteries run out of juice. Carrying extra batteries is always good in emergencies like this! If you’re detecting for long hours, then having an ample amount of backup batteries will be helpful. While you’re at the store buying extras, don’t forget to buy a few replacement coils too!

Let us explain why this is helpful.

Replacing worn-out coils:

Coils are an important part of any detector. They’re a loop of wire at the end of your metal detector that helps with picking up magnetic fields. So, if one’s broken or wearing out, then it needs to be replaced as soon as possible! If the coil has lost sensitivity or isn’t working properly, you might not be able to detect the smallest items. Always make sure your coils are in good condition and replace them if they’re broken!

Take your toolbox with you:

This is one of the most important things you’ll need! If your detector doesn’t have a pinpointer, then taking one with you will prove to be helpful. Metal detectors are great at locating objects in the ground but pinpointing them can be challenging for beginners or people who don’t know what they’re doing. A toolbox will come in handy for storing all your accessories.

Use a Frisbee to Dig:

Now you’re probably wondering, why a frisbee? You have to leave the land looking almost exactly like it was before you started digging. To fill the hole, a frisbee will not only keep your hands from getting dirty but will make the job ten times easier! Carry one now and you’ll thank us later!

Start hunting after rain:

Metal detecting works by picking up magnetic fields. It’s like your detector is a magnet and it detects other magnets! Electromagnetic conductivity is improved in wet conditions which may enable you to find things that are a little outside the detection radius of your equipment. Plus, it’s easier to dig when the ground is wet than it is in dry weather.

With these tips, we believe you are more than ready and equipped for your first metal exploration. Metal detecting finds can take you on a rollercoaster ride. You will find a lot of trash but every once in a while, you may come across the biggest discovery of your life!

For any questions, visit the FAQs section below.



What are the different types of metal detectors?

There are two main types of metal detectors –  VLF (very low frequency) and pulse induction. Pulse Induction is more sensitive to smaller objects while VLF is used for larger objects like treasure chests, safes, etc.

What are the different types of coils?

There are three main coil types – DD, Concentric, and Mono. They all have their own benefits. DD Coils give a very large detection range, but they don’t excel at pinpointing objects. The other two work great for pinpointing objects while reducing the detection range.

What is a pinpointer?

A pinpointer is an electronic device that helps you find objects when they’re close to the surface but not in direct sight. It’s like having another detector that can help pinpoint small targets! It uses both audio and vibration alerts, so you don’t have to keep looking at the screen.

click here for more articles